Brushed Motor and ESC Kit for 1/10 RC Rock Crawler

The Jrelecs 550 brushed motor and 80A ESC set is a high-quality and versatile solution for 1/10 scale electric RC crawler cars, including the Traxxas TRX4, 1979 & 2021 Ford Bronco, TRX6, Axial SCX10 II & III, Redcat Gen7 & Gen8 V2, and RC4WD D90. This package offers multiple protective features, exceptional waterproofing, and dual running modes to cater to various terrain and speed requirements.

The ESC (Electronic Speed Control) boasts a persistent current of 80A and a peak current of 320A in the forward direction, with a reverse persistent current of 40A and a peak current of 160A. It is designed to operate on 7.4V (2S LiPo) or 6V-8.4V (5-7 cells NiMH) power sources. The BEC (Battery Eliminator Circuit) output is switch-mode, providing 5A at 7.4V/6.4V, and is adjustable.

The ESC offers a versatile running mode, allowing users to switch between Crawlers and High Speed settings, as well as Forward and Reverse. Programming can be done through the program port or jumper cap input. The input connectors are T-connectors, while the output connectors are 4.0 bullet connectors (female). The compact dimensions of the ESC are 42x35x27mm, and it weighs 50g.

The accompanying 550 21T brushed motor is rated for 78-137W and has a no-load speed of 12,800 RPM at 7.2V-12.6V. The motor draws a current of 1.42A and has a resistance of 0.0043 ohms. It features a 35.6mm diameter and a 57.5mm length, with a 16.5mm extended shaft and a 3.175mm shaft diameter. The motor connector is 3.5mm, and the total weight is approximately 232g.

The Jrelecs 550 brushed motor and 80A ESC set offers a range of protective features, including overload protection, low-voltage cut-off, over-heat protection, and throttle signal loss protection. The high-quality waterproof and dust-proof design ensures the system can be used in all weather conditions without any risk of damage from water or dust.

This enhanced package addresses a common issue with conventional 550 motor sets, where the ESCs are often rated at 60A. By using an 80A ESC, the Jrelecs set can better handle the increased current and overload demands, providing users with a more reliable and worry-free experience.

The package includes the Brushed 80A ESC, a 12T Brushed 550 motor, and a user manual. It is designed to be widely compatible with a variety of 1/10 scale electric RC crawler cars, catering to the needs of enthusiasts and hobbyists who demand high-performance and reliable components for their off-road adventures.

product information: